KRELL S300I INTERGRATED AMPLIFIER

2 years ago 377

Item Condition: EXCELLENT

Shipping Options: Pickup available but audition is not available.,Shipping is available at agreed cost.

Suburb or Town: mount martha

State: VIC

Payment Method: EFT/CASH ON PICKUP

Reason for selling: CHANGE OF DIRECTION

Further Information: KRELL S-300I IN EXCELLENT CONDITION,COMES WITH ORIGINAL REMOTE DOUBLE BOX PACKING CARTON,MANUAL
PICK UP OR YOU CAN ORGANISE YOUR PREFERRED COURIER
LAST 2 PICS ARE FROM THE WEB ALL THE REST ARE OF THE ACTUAL UNIT.
as a side note if you happen to use a marantz CD player the Krell remote will operate the main features of the Marantz CD player as they both use the same codes.

1 pr. balanced via XLR connectors
3 pr. single-ended via RCA connectors
1 dedicated iPod input via 30-pin connector

Outputs
1 pr. preamp outputs via RCA connectors
1 pr. speaker outputs via gold-plated binding posts

Control inputs
1 RS-232 input via 9-pin D-subminiature connector
1 remote IR detector input via 3-conductor 3.5 mm connector
1 12 VDC trigger input via 2-conductor 3.5 mm connector

Control output
1 programmable 12 VDC trigger output (30 mA maximum current) via 2-conductor 3.5 mm connector

Input impedance
Balanced: 95 kΩ
Single-ended: 47.5 kΩ

Frequency response
20 Hz to 20 kHz 0, -0.14 dB
84 dB, wideband, unweighted, at maximum gain, referred to full power output
>93 dB, "A"-weighted

Gain
32.5 dB

Input sensitivity
Single-ended or balanced: 800 mV RMS

Total harmonic distortion
<0.035% at 1 kHz, at 150 W, 8 Ω load
<0.26% at 20 kHz, at 150 W, 8 Ω load

Output power
150 W RMS per channel at 8 Ω
300 W RMS per channel at 4 Ω

Output voltage
99 V peak to peak
35 V RMS

Output current
15 A peak

Slew rate
50 V/S

Output impedance
75, 20 Hz to 20 kHz, referred to 8 Ω

Power consumption
Standby: 40 W
Idle: 60 W
Maximum: 1000 W

Heat output
Standby: 140 BTU/hr
Idle: 210 BTU/hr
Maximum: 1600 BTU/hr

Specifications for preamp only:

Gain
6.3 dB (single-ended)

Volume control
Current-mode, 12-bit, discrete R-2R ladder

Input overload
Balanced: 12 V RMS
Single-ended: 6 V RMS

Output overload
8 V RMS (single-ended)

Frequency response
20 Hz to 20 kHz 0, -0.05 dB
94 dB, "A"-weighted

Dimensions
17.26 in W x 4.09 in H x 17.70 in D
438 mm W x 104 mm H x 450 mm D

Weight
Unit only: 42 lb [19.0 kg]
As shipped: 51 lb [23.1 kg]

Review

Read Entire Article