Item Condition: Excellent
Shipping Options: Shipping is available at agreed cost.
Suburb or Town: Brisbane west side
State: QLD
Payment Method: EFT or cash on pickup
Reason for selling: System change
Further Information:
Have purchased new floorstanders for my HT setup so moving on my Sonus stand mounts and center speakers.
Both sets were bought new from Living Sound here in Brisbane. The Venere were bought in approx 2016 and the Sonetto was purchased in Dec 21. The Venere would be out of warranty now but the Sonetto still has a 3 years left.
All speakers are in excellent condition.
I have the packaging for the Sonetto but the Venere packaging is unfortunately long gone. I can drop them off to my local Pack and Send (Taringa) for any shipping needs. Buyer to arrange.
They have seen very little use. The Venere were in and out of my various systems but during my ownership I have spent most of my time out of town for work. I doubt they would have done 500 hours. The center would be well under 100 hours.
I would consider separating them but only if I have buyers for each but preference if for a single sale.
No stands included with the Venere 2.0, Sonetto includes the original stand. All grills are included and are in excellent condition.
Venere 2.0
SYSTEM
2 way standmount bookshelf vented box
LOUDSPEAKERS
Tw: High definition precoated fabric dome driver with no ferrofluid, Ø 29 mm
Md: Free compression basket design and Curv cone, 1 x Ø 180 mm
Crossover 2.500Hz
FREQUENCY RESPONSE
40 Hz – 30.000 Hz, tuning port included
SENSITIVITY
88 dB SPL (2.83V/1M)
NOMINAL IMPEDANCE
6 ohm
SUGGESTED AMPLIFIER POWER OUTPUT
50W – 200W without clipping
DIMENSIONS (HxWxD)
449 x 246 x 336 mm
WEIGHT
31 Kg ea – net weight
Link to Owners Manual
https://www.sonusfaber.com/wp-content/uploads/pdf/owners-manual/OWNER MANUAL_ESECUTIVO FP 3105.pdf
Sonetto Center I
SYSTEM
2-way horizontal loudspeaker system. Vented box design.
LOUDSPEAKERS
Tw: High Definition DAD™ driver. DKM dome diaphragm, Neo Magnet system. Ø 29mm
Mw: Ultra-free compression basket. Custom diaphragm made with cellulose pulp and other natural fibers, Ø 2 x 150mm cone drivers.
Crossover 1.550Hz
FREQUENCY RESPONSE
60 Hz – 25.000 Hz
SENSITIVITY
90 dB SPL (2.83 V/1m)
NOMINAL IMPEDANCE
4 ohm
SUGGESTED AMPLIFIER POWER OUTPUT
50W – 200W, without clipping
DIMENSIONS (HxWxD)
242 x 495 x 303 mm
WEIGHT
6,5 Kg ea – net weight
Link to Owners Manual
https://www.sonusfaber.com/wp-content/uploads/pdf/owners-manual/OWNERS_Sonetto_148x210_LOW.pdf
Photos







English (US)